Power adapter cord with C14 input and Schuko output Suitable for a load connection to an UPS or PDU

This cable connects outdoor components of the radio frequency with indoor components. The RF cable is characterized by a low attenuation.

Extends digital audio signals up to 150m using Cat.5/5e/6 23/24 AWG Cable Inputs: Coaxial (SPDIF) & Optical (Toslink), USB Mini-B (power only) Ouputs: (SPDIF) & Optical (Toslink) Supports stereo and multi-channel audio (Dolby Digital, DTS, 7.1) Powered via USB port (cable not included) or external PSU (supplied) 2 year warranty

VDE approved power cord German Schuko input and C5 output Molded plugs

Cable often used for UPS from 3000 VA and for connecting Blade servers. Connection cable 16 A with IEC320 C19 Female and 3P German connector plug, angled Cable: H05VV-F 3G1.5 3x 1.5mm² Nominal data: 250 VAC/16 A Colour: black

Connector surface: nickel-plated Color cable: black Color connector: black Hoods: molded Shielding: Unshielded Assortment: Device Connection Cables Length: 1.8 m Connector 1: Schuko (CEE 7/7), plug Connector 2: IEC C13, jack Lead cross-section: 0.75qmm Current load capacity: 250V/10A Cable standard: H05 VV F3G Wire material: CU

Do you want to extend your HDMI signal without compromising quality? This is where the HDMI booster comes into its own. HDMI boosters enable HDMI devices to be connected to each other over longer distances. The DIGITUS HDMI Repeater extends your HDMI signal to up to 30 meters and supports brilliant 4K (30 Hz) resolutions for excellent image quality. Furthermore, the compact housing enables you to place the booster anywhere. Moreover, the HDMI booster does not require an external power supply.

Send uncompressed HDMI/DVI signals up to 100m using low cost network cable Ideal for use with HDBaseT™ equipped projectors and displays Can be used in conjunction with the Lindy 100m Receiver or 70m Faceplate Receiver Supports 4K (3840x2160) @ 30Hz Supports HDTV resolutions up to 1080p with 24/36/48 bit colour depth Supports 3D, including 1080p 3D Supports LPCM, DTS Digital, DTS HD, Dolby Digital & Dolby True HD audio Allows the remote control of equipment via IR  HDBaseT technology allows uncompressed full HD digital video, audio, 100BaseT Ethernet and more through a single LAN cable 2 year warranty

Local and Remote units connect at distances up to 200 meters using Cat 5e cable Dual console operation – control your system from both the local and remote USB keyboard, monitor, and mouse consoles High resolution video – up to 1920x1200@60Hz at 30m,1600x1200@60Hz at 150m, 1280x1024@60Hz at 200m Adjustable gain control – automatically and manually adjusts signal strength to compensate for distance

Cable often used for UPS from 3000 VA and for connecting Blade servers. Connection cable 16 A with IEC320 C19 Female and Schuko plug, angled Cable: H05VV-F 3G1.5 3x 1.5mm² Nominal data: 250 VAC/16 A Colour: black  

Distributes HDMI resolutions up to 100m over Cat.6 network cable via HDBaseT technology Supports HDMI 10.2G resolutions up to 4K@60Hz 4:2:0 RS-232 & CEC pass-through, bi-directional IR for simple control & integrated 3 port Ethernet hub for LAN access Supports PoH (Power over HDBaseT), requiring a power supply connection from only one side of the installation 2 year warranty

The Lindy 500m Cat.6 Phono Analogue Audio Extender is a compact solution for extending stereo audio signals to much longer distances over easily accessible network cable. With a compact pigtail style design and no requirement for additional power, the extender provides a minimalistic extension solution that can be discreetly installed alongside source devices and analogue speakers. The transceiver units provide seamless interoperability, allowing for use of either unit at any side of the setup.

Αυτό το καλώδιο επέκτασης SATA από την Delock επιτρέπει την επέκταση της διασύνδεσης δεδομένων και τροφοδοσίας SATA και μπορεί να χρησιμοποιηθεί για τη σύνδεση διαφορετιών συσκευών με σύνδεσμο SATA 22 ακίδων.

German Schuko input and C13 output Molded plugs with integrated strain relief

SATA power supply splitter cable with single SATA male to 2 x SATA female connectors 90 degree angled SATA output connectors Length: 0.15 m

This cable enables the connection of devices with a protective contact plug to a non-heating device connection, such as can be found at the output of a UPS or a power distribution unit (PDU) in the 19" network cabinet.

This SAS cable by Delock can be used to connect internal SAS devices, e.g. a controller with Mini SAS connector to 4 HDDs with SATA ports.

Cable length: 0.6 m Connectors: C13 - C14 Maximum load: 230V / 6A Color: black The C13 to C14 powercord can be used for extending a C13 powercable. Mostly used for connecting PDUs (Power Distribution Units) in datacenters. ACT provides many types of power cables: CEE 7/7, Euro, UK, USA, Italian, Danish, Swiss and Indian/South African cables. ACT supplies powercables with the following connectors: CEE 7/7, IEC60320 C5, C7, C13, C14, C19, C20 and IEC60309 CEE1. ACT offers different types of power split cables and power cables in the following colors: black, white, red, blue, green and yellow.

Offers the possibility to extend your RS232 Ports over twisted pair, up to 1000 m Sends RS-232 signals with a data transfer rate of 230kbit/s Durable metal casing Supports Full-Duplex data transfer Hardware solution, no compatibility problems